![]() ![]() Used for 500 series headsets and com hubsĬMX Orion, 37 pin no option cable CMX Orion, 37 pin no option cable ![]() (p/n 110-5161-30) Requires the use of an optional pigtail if connected to the transceiver, P/N R597-5357-707 or R597-5357-738 or R597-5357-742.ĭB15 Male to 2 DB15 Females Joystick Sharing Cable will be required if dual head radio.ĭW-65US under helmet, slotted dome A00-0145-50ĭW-65US, A00-0145-00 Underhelmet slotted DomeĭW-65FS, A00-0145-XX FH-10S, Overhead, single-sided Then in the Global settings under the Mobile options tab, the CH1 & CH2 Input 1 needs to be set to "External PTT". For VM7000 radios with DUAL KCH-20 Remote Heads make sure Interface type is set to "Kenwood Control Head 20". Then in the Global settings under the Mobile options tab, the CH1 Input 1 needs to be set to "External PTT". Programming the radio using Armada Software in the Interface type set to "Kenwood Control Head 20". This will work with up to 3 transceivers connected to the head and RX Audio will be available through the MR-47X to the intercom. ![]() (p/n 110-5131-30) This requires using the EFJ/Kenwood KCT-72 adaptor for the MR-47X to plug into. (p/n 110-5165-30) Has a DB-25 on the transceiver, Pin 13 would need to be set "External PTT" in Armada Software under Global/Mobile Options tab.ĮF Johnson / Kenwood VM7000 series radios with KCH-20R remote head Through accessory cable no remote head, custom 2 - 3 weeksĮF Johnson / Kenwood VM5000 / VM6000 series radios thru Accessory port Through accessory cable with single remote head, custom 2 - 3 weeksĥ3SL ES, 5300ES with optional accessory cable, P/N 597-5357-746-01 RMU 25, 45, 50, including remote head, through accessory portĭPH, EPH, EPI, EPU, EPV, GPH, LPH, LPU, LPXĥ300 With 15 pin accessory port with Hand Held Controlerĥ300, ES, LS, Asend, Through mic port with standard headĥ3SL ES, 5300ES with optional accessory cable, P/N 597-5357-736-01 Olympian series through the accessory port Do not connect the blue & green wires to the external 3.5mm speaker jack, this will feed back audio and cause clipping. Radio must me programmed for external on / off speaker function. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |